Poolfenceistall v2
How to install a pool or boundary fence
POOL AND BOUNDARY
FENCING
INSTALLATION GUIDE
Lorem ipsum about 3 or 4 sentences of intro text to be added here later. Lorem ipsum about 3 or 4 sentences of intro text to be added here later. Lorem ipsum about 3 or 4 sentences of intro text to be added here later.
IMPORTANT! : Before installing your fence, check with your local Council regarding specifi c boundary and pool fence requirements. Before digging check for underground services (gas, power, water, telephone)
“DIAL BEFORE YOU DIG” on 1100 (AUS) www.beforeudig.co.nz (NZ)
POOL & BOUNDARY FENCING INSTALLATION GUIDE
MARK AND DIG HOLES
- Set up the string-line on the fence-line, keeping it as low as practical, keeping it an even distance above the ground.
- Using a tape measure or a spacer, mark out the post hole centres along the line. Allow for the width of posts and the relevant panel.
- Dig the post holes approx 200mm diameter x 600mm deep. Corner, end and gate post holes should be bell shaped at the bottom for extra strength.
