Easy Frame Install V4
How to install a Balustrade
Balustrade must comply with Australian Standard AS1170. Please check with your local Council regarding specifi c requirements.
Before digging check for underground services (gas, power, water, telephone)
“DIAL BEFORE YOU DIG” on 1100 (AUS) www.beforeudig.co.nz (NZ)
BALUSTRADE INSTALLATION GUIDE
GATES
Determine which side the gate is hinged on Determine the top & bottom hinge (depends on whether swinging in or out)
Insert vertical rail into the 2 hinged corners (Side B) Insert other vertical Rail into the remaining two corners (Side A)
Insert all Horizontal Rails (C) into Side A and B.
Lay crossbrace on top of the gate, ensuring it starts at the bottom near a hinged corner and ends at the opposing corner, mark and cut to size
Next seperate bottom corner piece (D) from the rails, fit the cross brace in position, and refit the corner piece.
Note: sizes 1100w x 1200h and 1800w x 1200h don’t come with gussets.
